Friday, March 29, 2024

Wireless Mt. Washington

Datamation content and product recommendations are editorially independent. We may make money when you click on links to our partners. Learn More.

The winter weather at the top of Mount Washington, the highest peak
in New Hampshire and in the whole northeast United States, is, in a word, foul.

On one record-breaking occasion, the wind speed measured at the Mount Washington
Observatory reached 230 miles per hour. While it may be true that you can’t
fall off a mountain, in those conditions you could easily get blown off one.

If Wi-Fi can work here, it stands to reason, it can work just about anywhere.
Thanks to some canny engineering by Robert “Hobbes” Zakon, chief technology
officer at Zakon Group LLC of North
Conway, N.H., Wi-Fi does indeed work here.

Zakon engineered a five-mile point-to-point shot using ORiNOCO equipment from
Proxim to connect a remote Web cam to the Observatory’s
wired frame-relay link to the Internet.

“Mount Washington is renowned for having the worst weather in the northeast,”
Zakon says. “The highest ground wind ever recorded in the U.S. was recorded
there. It’s a whole lot of weather — snow, ice, winds. Engineering a solution
was a big challenge.”

His firm, a consulting/engineering jack of all trades, counts wireless as one
of its specialties, but only one of many. “We work mostly with advanced
and emerging technologies,” Zakon says.

Mount Washington Observatory is a non-profit
weather research station. The facility is shared by the US Forest Service and
is also a tourist center in the summer. The Observatory already had some Web
cams in place to show weather conditions on the mountain, but it didn’t have
any outside, and it didn’t have any that showed a key feature: the Tuckerman
Ravine on the southeast side, an area popular with spring skiers and summer
hikers.

A Web cam would be a boon to the hikers and skiers. “Sometimes it’s snowing
up there when it’s a perfectly sunny day down below [in North Conway],”
Zakon says. “And you get some amazing cloud cover up there.” If it
was properly done, if it could show enough detail, a Web cam might even be useful
in helping guide rescuers to avalanche survivors.

The Observatory secured a government grant to install a Web cam that would
show the ravine. Observatory members who use the recreation facilities on the
mountain also chipped in. Securing funds was the easy part, though. It was left
up to Zakon to solve the real problems: how to provision and power a communications
link 6,000 feet up a desolate mountain.

The logical place to put the Web cam to get the view the Observatory wanted
was across Pinkham Notch (a notch is a gap in a mountain range) at the Wildcat
ski area, a seasonal facility only open in late winter and early spring.

Whatever communications technology they used, it would need power. The ski
area uses gasoline generators, which the Web cam station could also have used
— but only during the short skiing season. The Observatory could also have
installed its own generator, but that would have meant hauling fuel up the mountain
in winter, which would be impractical.

That left solar or wind. Wind power involves moving parts exposed to extremely
high winds which could result in damage or jamming. Zakon went with solar from
SunWize Technologies of Kingston, N.Y.

An affordable system couldn’t be counted on to provide continuous power year
round, but the communications and camera technology wouldn’t need to be switched
on all the time as the plan was to transmit an image only every 15 minutes.

“We’re not looking at people in an Internet cafe here,” Zakon points
out. “Things aren’t going to change that fast.” So the system was
engineered with a photo-cell switch and timer that would switch the system on
only during daylight hours for three minutes at a time every 15 minutes.

That solved the power source problem.

Getting a phone line to the ski area was out of the question. The ski operators
use walkie-talkie-style radios for communications. While surveying the area,
though, Zakon noticed that he could see the roof of the observatory from Wildcat.
That meant fixed wireless was a possibility.

After researching the market, he decided the best bet was standards-based 2.4
GHz — Wi-Fi. It provided the bandwidth required to transmit high-quality images,
it was inexpensive — and going with a standards-based solution would make it
easier in the future to turn the Wildcat site into a hub for a wireless network
of remote stations feeding weather data.

Zakon considered off-the-shelf components from Young
Design Inc.
(YDI) and HyperLink
Technologies Inc.
, but in the end opted for the all-in-one-box ORiNOCO Point-to-Point
Backbone Kit, built around the OR-500 Outdoor Router. (Proxim has since replaced
this product with the Tsunami QuickBridge
11
.)

The ORiNOCO gear barely met the five-mile range requirement, but a single-vendor,
pre-engineered solution was easier to sell to the Observatory, which would be
maintaining the system after Zakon got it up and running. “ORiNOCO technical
support said, ‘Yes, it’ll probably work,'” he recalls. “We
didn’t get the warmest fuzziest feelings from ORiNOCO.”

Zakon also gave careful consideration to an antenna, selecting a Yagi model
from ORiNOCO in the end. It had to be directional to reduce the potential for
interference with other RF activity on the mountain, including military, government
and broadcast. With a parabolic antenna, there would be the possibility of ice
accumulating in the dish and attenuating the signal. A whip antenna would be
too prone to snapping in the wind.

Placement of the antennas and radios was critical — especially at the Wildcat
end where the camera would also be placed. Zakon found an ideal spot. The ski
area at one time had a gondola ski lift. The structure at the top of the mountain
remained. Zakon had a custom enclosure built for the wireless, solar power and
camera technology and mounted it in one of the gondola bays.

At the Observatory end, he found he could mount the antenna and radio inside
in a window well behind hurricane-proof glass.

In the end, though, all the careful engineering amounted to best guesses as
to what the equipment could withstand in the way of weather. The Observatory
made the decision to go ahead and buy the equipment and test it this winter
before going live. As it happened, it was a good year to test — it was one
of the worst winters in a long time. The network came through with flying colors.

The camera is a Canon VC-C4 pan/tilt/zoom (PTV) model.
It’s controlled by a purposely-built AXIS 2401 Video Server from Axis Communications, a Swedish
company, which allows an operator to control its angle of view and zoom the
lens in and out over the Internet.

To see output from the Wildcat Web cam, go to this page at the
Mount Washington Observatory site. To learn more about the engineering project
and see pictures of the technology in situ, go to this page
at Zakon’s site.

Subscribe to Data Insider

Learn the latest news and best practices about data science, big data analytics, artificial intelligence, data security, and more.

Similar articles

Get the Free Newsletter!

Subscribe to Data Insider for top news, trends & analysis

Latest Articles