Selecting a VoiceXML Gateway: Page 2

(Page 2 of 2)

Port density

Port density refers to the number of telephone connections that a VoiceXML gateway can handle on a single server.

Most VoiceXML gateways will scale to meet the needs of large call centers, however, very large installations may require special hardware. Most platforms are capable of handling up to 4 T1 connections or 96 telephone connections (24 per T1).

Practically speaking, if you require Text-To-Speech (TTS) and Automatic Speech Recognition (ASR) functionality, a single server should not exceed 24 ports (or a single T1 telephony board). The reason for this is that each TTS and ASR channel can utilize a great deal of resources. If we were to divide 1 gigabyte of memory by 24 ports, that would give us approximately 42 megabytes per port, which may not be enough to run a TTS and ASR channel simultaneously. CPU resources are an even bigger issue. 

Typically, you will vary the number of TTS channels based on the expected usage, since most applications will use pre-recorded prompts and limit the use of the TTS engine. A reasonable ceiling for a VoiceXML gateway is around 8.

When using port density as a basis for comparison, you must keep these issues in mind. A recommended course of action would be to determine the number of TTS and ASR channels that will be required along with your expected call volume.

Performance

Every vendor will claim that their platform performs well, but does it really? You should confirm performance claims through independent test analysis. CT Labs is one such firm that provides testing services for evaluation purposes. When performance becomes an issue, the usual course of action is to run the TTS engines on a separate server from the ASR servers. When the two are segmented, the ASR server should be able to handle up to 96 voice ports. The maximum number will depend on the performance of the vendor's VoiceXML interpreter.

Scalability

Find out what the procedure is for upgrading the platform when more capacity is needed. Will you have to rebuild the server? Can you chain other servers together and have them work in parallel or will you have to segment the servers and manage them independently? Find out the maximum number of ports the platform can handle at once.

There are two basic ways to scale the platform. The first is to add additional TTS, ASR, or media gateway servers based on demand. These systems communication over a network.

The second way is to use a passive back plane where processor and telephony boards slide into the chassis as needed. A back plane configuration will likely perform better than a networked environment because of the inherent latency of network communications versus a shared hardware bus.

Financial Stability

Because most VoiceXML gateway vendors are relatively new companies, their financial viability should be a concern. If you aren't confident that the company is stable, ask them to reveal their financial statements so that you can be comfortable that they'll be around to service the platform in the future.

Customer Support

Look into what support is available from the vendor after you buy the gateway. Will they help you set it up? Do they have a professional services team that can help you integrate the platform with your enterprise? Keep in mind that some vendors are more focused on developing the product and would prefer to rely on partners for customer support and services. In these cases, make sure you know who will be supporting the product and make sure you're comfortable with the third party if the vendor will be referring you elsewhere for support and integration services.

List of VoiceXML Gateway Providers

Jonathan is a member of the Ferrum Group, LLC  which specializes in Voice Web consulting and training.

This article was first published on VoiceXMLPlanet.com, an internet.com site.


Page 2 of 2

Previous Page
1 2
 





0 Comments (click to add your comment)
Comment and Contribute

 


(Maximum characters: 1200). You have characters left.